em mới taaujcon ufi về làm còn bỡ ngỡ ae xem gúp em g532 với em cám ơn VCC: 3.3 V, VCCQ: 3.0 V Bus: 1 bit (SDR 52MHz) Access mode: sector mode Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V) Card/BGA: BGA (Discrete embedded) - High density MMC Manufacturer ID: 0x90 (SK Hynix) Product name: H8G4u (0x483847347592), rev: 0x01, serial number: 0x28D9159E Manufacturing date: Jan 2018 CID: 90014A48 38473475 920128D9 159E155C CSD: D0270132 0F5903FF FFFFFFE7 8A40002A EXT_CSD revision: 1.7 (MMC v5.0, v5.01) Partition info: Boot1: 4 MiB Boot2: 4 MiB RPMB: 4 MiB [Provisioned, counter: 0] User area: 7.28 GiB(7,818,182,656 bytes) Cache size: 1 MiB Hardware reset function: 1 Partition configuration: 0x48 Boot acknowledge is sent during the boot operation Boot partition 1 is enabled for boot Partitioning support: 0x07 Device support partitioning feature Device can have enhanced technological features Device partitioning possible Boot configuration protection: 0x00 Boot bus conditions: 0x00 Boot area write protection: 0x00 eMMC selected: [HYNIX] H9TQ64AAETACUR/8GB (BGA221)
log này thấy có chỗ sai sai nạp file extcsd cho nó set config lại đi bạn Mã:Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1) Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x48. H/W reset function [RST_N_FUNCTION]: 0x01 High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000] Partitioning Support [PARTITIONING_SUPPORT]: 0x07 Device support partitioning feature Device can have enhanced tech. Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
