Huawei Y3 LUA-L02 Unlock Network By NCK

Huawei Y3 LUA-L02 Unlock Network By NCK

3 máy 1 lượt.hihi

Mã:

 @thanhnamPDAviet
 
 
Selected connection metod: FLASH Mode
 Exe version: NCKDongle AndroidMTK 2.5.8.5
 Selected model: Ascend Y3 II[LUA-L02]
 Action: Unlock
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM15)
 Boot mode: Preloader
 Phone detected...Please wait
 Sending DA agent, please wait...
 Using Algo 2.
 ----------------------------------------------------
 BaseBand CPU :MT6735M
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (58Gb+8192Mb) SAMSUNG 0x464e31324d42 
 EMMC FW VERSION: 06:00:00:00:00:00:00:00
 EMMC CID: 150100464E3132 : 000000000000000000
 EMMC UA SIZE: 0x1d2000000	 
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1d2880000	  [7.290 GB]
 Preloader SEC version: 2
 Status: USB_HIGH_SPEED
 IMEI[1]: 86982102034
 IMEI[2]: 86982102034
 Reading security, wait...
 SIM[1]: 
 Block1(N): Locked (remain:10) Code : 86474623 
 Block2(NS): Unlocked
 Block3(SP): Unlocked
 Block4(C): Unlocked
 SIM[2]: 
 Block1(N): Unlocked (remain:10) Code : 12345678 
 Block2(NS): Unlocked
 Block3(SP): Unlocked
 Block4(C): Unlocked
 Please note, some firmwares can display wrong codes.
 Some firmwares can be hardlocked.
 If this happen, perform direct unlock.
 If direct unlock fail,use reset package from support.
 If reset package not exist in support,request help in forum.
 Wait untill phone will start charging.
 All done.
 
 Selected connection metod: FLASH Mode
 Exe version: NCKDongle AndroidMTK 2.5.8.5
 Selected model: Ascend Y3 II[LUA-L02]
 Action: Unlock
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM15)
 Boot mode: Preloader
 Phone detected...Please wait
 Sending DA agent, please wait...
 Using Algo 2.
 ----------------------------------------------------
 BaseBand CPU :MT6735M
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (58Gb+8192Mb) SAMSUNG 0x464e31324d42 
 EMMC FW VERSION: 06:00:00:00:00:00:00:00
 EMMC CID: 150100464E3132 : 000000000000000000
 EMMC UA SIZE: 0x1d2000000	 
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1d2880000	  [7.290 GB]
 Preloader SEC version: 2
 Status: USB_HIGH_SPEED
 IMEI[1]: 86982102034
 IMEI[2]: 86982102034
 Reading security, wait...
 SIM[1]: 
 Block1(N): Locked (remain:10) Code : 80892296 
 Block2(NS): Unlocked
 Block3(SP): Unlocked
 Block4(C): Unlocked
 SIM[2]: 
 Block1(N): Unlocked (remain:10) Code : 12345678 
 Block2(NS): Unlocked
 Block3(SP): Unlocked
 Block4(C): Unlocked
 Please note, some firmwares can display wrong codes.
 Some firmwares can be hardlocked.
 If this happen, perform direct unlock.
 If direct unlock fail,use reset package from support.
 If reset package not exist in support,request help in forum.
 Wait untill phone will start charging.
 All done.
 
 Selected connection metod: FLASH Mode
 Exe version: NCKDongle AndroidMTK 2.5.8.5
 Selected model: Ascend Y3 II[LUA-L02]
 Action: Unlock
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM15)
 Boot mode: Preloader
 Phone detected...Please wait
 Sending DA agent, please wait...
 Using Algo 2.
 ----------------------------------------------------
 BaseBand CPU :MT6735M
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (58Gb+8192Mb) SAMSUNG 0x464e31324d42 
 EMMC FW VERSION: 06:00:00:00:00:00:00:00
 EMMC CID: 150100464E3132 : 000000000000000000
 EMMC UA SIZE: 0x1d2000000	 
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1d2880000	  [7.290 GB]
 Preloader SEC version: 2
 Status: USB_HIGH_SPEED
 IMEI[1]: 86982102034
 IMEI[2]: 86982102034
 Reading security, wait...
 SIM[1]: 
 Block1(N): Locked (remain:10) Code : 90198199 
 Block2(NS): Unlocked
 Block3(SP): Unlocked
 Block4(C): Unlocked
 SIM[2]: 
 Block1(N): Unlocked (remain:10) Code : 12345678 
 Block2(NS): Unlocked
 Block3(SP): Unlocked
 Block4(C): Unlocked
 Please note, some firmwares can display wrong codes.
 Some firmwares can be hardlocked.
 If this happen, perform direct unlock.
 If direct unlock fail,use reset package from support.
 If reset package not exist in support,request help in forum.
 Wait untill phone will start charging.
 All done.