Asus ZenFone 3 MAX (ZC520TL (X008DB) 7.0 Remove FRP Done

Asus ZenFone 3 MAX (ZC520TL (X008DB) 7.0 Remove FRP Done
Asus ZenFone 3 MAX (ZC520TL (X008DB) 7.0 Remove FRP By MRT

Mã:

@thanhnamPDAviet
 
	Disconnect Mobile...
	Re-Put the Mobile Bettery...
	Then Connect your Phone to Computer again....
	Please Make sure Mobile better has Power...
>>> Searching Mobile Port...
	Get Mobile Port is:  COM9
>>> Device driver identification: 
	MediaTek USB Port
>>> Mobile Has Connect...
	CPU_NAME: MT6735
>>> Reading Mobile Hardware Info...Success
	HW_Inf:  8A00	SW_Inf:  CB00
>>> Initialization Mobile ...Success
>>> Downloading Boot1 To Mobile Phone...Success
	The Flash Hardware Info:QE1	=====================Flash Type(eMMC)==============
	Flash   Size: 0x00000003A3E00000 -> 14910M
	Flash	 ID: 0x150100514531334D
	Flash   Name: Samsung_Unknow
	Flash symbol: QE13MB
>>> Software Auto Switch Hight Speed Has Enable...
>>> Swich Mobile to Hight Speed Re\Wr Port...
	Get Mobile Port is:  COM12
>>> Device driver identification: 
	MediaTek DA USB VCOM (Android)
>>> Reading Mobile Map Data...Success
>>> Software Auto Switch Hight Speed Has Enable...
>>> Swich Mobile to Hight Speed Re\Wr Port...
	Get Mobile Port is:  COM12
>>> Device driver identification: 
	MediaTek DA USB VCOM (Android)
>>> Reading Mobile Map Data...Success
>>> Extracting valid data from partition data...
>>>>Formating Mobile USER Data...
	ADD(HEX):0x0013C00000	Size(HEX):0x0000100000	
	Corresponding operation completed!!!
3MB
>>> Downloading Boot2 To Mobile Phone...
>>> Initializationing Mobile Hardware Parameter...Success